Category: incinerators

Posted on by

waste disposal burner

Incinerator but the dimension of chamber > > 2000 x >> 1200 mm. Get ready for melt FLUID Waste +/- 20 liter/hr.
Fueled by Heavy OIL Burner.waste disposal burner, efficient in managing both wet as well as dry waste. Which include house hold wastes as well as dry fallen leaves.
The chamber of the incinerator ought to have the ability to hold about 200 – – 250 kg of waste at an offered time. edical Waste Incinerators.
The mobile system is our concern then the fixed systems. Medical Waste Incinerators. The mobile system is our priority then the fixed units.
a; Batch Capacity for each version, just how much lots can we place in one-time. I require tio under stand in term of set lots once I can ut in Kgs.
b: Burning capability per hour, to recognize how much time it will certainly require to shed one set and what is cooling timem for each one.
c: How many batch can we place in every day basis per 24-hour.
d: The majority of systems will certainly be worked on Gas, so I need to recognize the required pressure of gas in psi to run the system without any problem.
e; I do wish to recognize an average life of system and also after how many years we need the repair work of linning etc.

2. What is your minimum capability and also maximum capability burner.

3. You do give secodn hand burner in good working problem.
4. We require just dual chamber dual burner incinerator.
5. Please send us DEFRA and also DADR authorization records by attachment, copy of ISO and also recap of gas emmission report from incinerators.

Posted on by

50 كجم لكل ساعة محرقة

معلومات أساسية.

أسواق التصدير: عالمية

معلومات إضافية.

العلامة التجارية: البرسيم

وصف المنتج

نانجينغ البرسيم الطبية والتكنولوجيا المحدودة هي شركة رائدة في تصنيع محارق النفايات في الصين. نحن مصنع محلي وواحد من أكبر مصدري الصين. معدات المحارق الحرارية هي المعالجة الرئيسية للنفايات في جميع أنحاء العالم ، للنفايات الطبية ، وحرق الحيوانات ، والمحرقة في الصين ، والمحرقة في الصين ، والمحرقة في المختبر ، والمحرقة في فيتنام ، والمحرقة غير مكلفة ، والنفايات المعدية المحرقة ، وحرق الحيوانات الأليفة وغيرها من المواد الصلبة. القدرة من 10 كلغ / ساعة. إلى 500 كجم / ساعة ، ما يصل إلى 6 أطنان في اليوم. في الوقت الحاضر ، نوفر سلاسل مختلفة لمتطلبات العملاء المحليين ونصمم محرقة محدثة بتقنيتنا الرائدة. ميزة التصميم المحدثة لمجموعة المحارق لدينا تجعلها واحدة من أكثر المحارق فعالية من حيث التكلفة في العالم.

مجال التقديم:
1. المستشفى والعيادة: نفايات إيتريك ، نفايات معدية ، ضماد ، نفايات حيوية ، دواء.
2. بيت الذبح ومستشفى ومزرعة الحيوانات الأليفة: حيوان ميت ، نفايات بيولوجية.
3. المجتمع والميناء والمحطة: النفايات البلدية الصلبة ، إلخ.
4. المختبرات ، المواقع النائية ، عمليات الإغاثة من الكوارث ، حرق جثث الحيوانات

العناصر / النموذج YD-10C YD-20C YD-30 ج YD-50 ج
معدل الحرق (كلغ / ساعة) 10 كجم / ساعة. 20 كجم / ساعة. 30 كجم / ساعة. 50 كجم / ساعة.
سعة العلف (كلغ) 40 كجم 40 كجم 50 كجم 80 كجم
وزن المعدات 1200 كجم 1200 كجم 1800 كجم 2200 كجم
الغرفة الأساسية (لتر) 200 200 250 400
الحجرة الثانوية (لتر) 140 140 140 140
الأبعاد الخارجية (سم) 170 × 140 × 160 170 × 140 × 160 170 × 140 × 190 180 × 160 × 200
الأبعاد الداخلية (سم) 55 × 55 × 65 55 × 55 × 65 55 × 55 × 85 70 × 70 × 85
خزان الزيت (لتر) 50 100 100 150
فتح الباب (سم) 38 × 48 38 × 48 38 × 48 45 × 55
مدخنة (م) 5 5 5 5
نوع المدخنة ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل
الغرفة الثانوية نعم نعم نعم نعم
غرفة الاحتراق المختلط نعم نعم نعم نعم
غرفة مرشح الدخان نعم نعم نعم نعم
وقود الاحتراق النفط / الغاز النفط / الغاز النفط / الغاز النفط / الغاز
وقت الإقامة 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية.
مراقبة درجة الحرارة نعم نعم نعم نعم

اتصل الآن هاتف: + 86-25-8461 0201
Posted on by

Установки для утилизации медицинских отходов

описание продукта

Инсинератор с ПЛК модели TS – это новейшая разработка для обработки отходов, включая медицинские отходы, кремацию животных и другие твердые отходы. Это качественное оборудование для различных объектов: установки для сжигания кремации, производители кремации, производители кремации, кремация животных в Малайзии, горелки для крематориев, печь для сжигания крематориев, крематорий для животных, например, больница, отдел окружающей среды, агентства по кремации животных и т. Д. CLOVER Incinerator поставляет обновленные модели. с двойной камерой сгорания и камерой дымового фильтра с огнеупорными линиями и температурой камеры сгорания до 1200 ° C.

Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Область применения:
1. Больница и клиника: медицинские отходы, инфекционные отходы, перевязочные материалы, биологические отходы, медицина.
2. Бойня, больница для домашних животных и ферма: трупы животных, биоотходы.
3. Сообщество, морской порт и вокзал: твердые бытовые отходы и т. Д.
4. Лаборатории, удаленные районы, операции по оказанию помощи при стихийных бедствиях, кремация животных

Предметы / Модель TS50 (ПЛК)
Картина
Скорость сжигания 50 кг / час
Емкость подачи 100кг
Режим управления ПЛК
Камера сгорания 560 л
Внутренние размеры 100x80x70 см
Вторичная камера 280L
Камера дымового фильтра да
Режим подачи Руководство по эксплуатации
Напряжение 220В
Мощность 0,7 кВт
Расход масла (кг / час) 12.1–24
Расход газа (м3 / час) 9,9–26,1
Монитор температуры да
Температурная защита да
Масляный бак 100л
Дверца подачи 70×55см
Камин 5 метров
Тип дымохода Нержавеющая сталь
1-й. Температура камеры 800 градусов – 1000 градусов
2-й. Температура камеры 1000 градусов-1200 градусов
Время проживания 2.0 сек.
Вес брутто 4500кг
Внешние размеры 230x130x155 см
Posted on by

Waste Burning and Incineration Combustion Process

The combustion, or burning, of solid waste proceeds through a series of stages. Water is first driven from the unburned waste by heat produced from material burning nearby or from an auxiliary burner. As the waste heats up, carbon and other substances are released and converted into burnable gases. This is referred to as gasification. These gases are then able to mix with oxygen. If the temperature inside the burn chamber is high enough and maintained for a long enough period of time, the hot gases are completely converted into water vapour and carbon dioxide, which is then released into the air. If the temperature inside the burn chamber is not high enough and the burn time is too short, complete conversion of the burnable gases does not occur and visible smoke is released into the air.  Another result of burning at low temperatures is the creation of pollutants that were not originally present in the waste. This process is known as de novo synthesis. Dioxins, furans and other complex chemical pollutants can be formed through this process.

Ash produced from combustion takes the form of either fly ash or bottom ash.  Fly ash is the fine particles carried away in the form of smoke while bottom ash is the course non-combustible and unburned material that remains after the burn is complete. The type and amount of pollutants in the fly and bottom ash depend upon what waste is burned and completeness of the combustion process.

The completeness of combustion is determined by all of the following factors:

Temperature

The temperature generated is a function of the heating value of the waste and auxiliary fuel, incinerator or burn unit design, air supply and combustion control.  Complete combustion requires high temperatures. Generally, temperatures that exceed 650oC with a holding time of 1-2 seconds will cause complete combustion of most food and other common household waste.  Segregation of waste is required when using methods that don’t routinely achieve these temperatures. Dual chamber incinerators, which are designed to burn complex mixtures of waste, hazardous waste and biomedical waste, must provide a temperature higher than 1000oC and a holding time of at least one second to ensure complete combustion and minimize dioxin and furan emissions.  When these high temperatures and holding times are achieved, waste will be completely burned and ash, smoke and pollutant concentrations will be minimized.

Because exhaust gas temperatures vary from ambient to greater than 1000°C each time a batch waste incinerator is used, optional air pollution control systems with evaporative cooling towers and scrubbers are seldom recommended. However, it may be necessary to employ these systems with large continuous feed incinerators if additional cleaning of exhaust gas is required by regulatory authorities.

Holding Time

Complete combustion takes time.  Holding time, otherwise known as retention or residence time, is the length of time available to ensure the complete mixing of air and fuel, and thus the complete burning of waste. Low temperatures, low heating values of the waste and reduced turbulence require that the holding time be increased to complete the combustion process.

Turbulence

The turbulent mixing of burnable gases with sufficient oxygen is needed to promote good contact between the burning waste and incoming air. This will help in achieving the high temperatures at which waste can be completely burned. The amount of mixing is influenced by the shape and size of the burn chamber and how the air is injected. Passive under-fire ventilation achieved during open burning does not result in sufficient turbulence for the burning of a wide variety of waste.  Also, it is important not to overfill the burn chamber as airflow may be blocked and the amount of turbulence further reduced.  The more advanced incineration designs provide effective turbulence through the forced introduction of air directly into hot zones.

Composition of the Waste

The heating value, wetness and chemical properties of the waste affect the combustion process and the pollutants that are contained in the resulting smoke and ash. The higher the burn temperature, holding time and turbulence that are achieved, the less effect the composition of the waste has on completeness of the burn.

Posted on by

Burner tiny to tool waste dispossal

Carburant Diesel

The waste most include vary products plastics, rubber, paper, turf, leaves, woods, fruits, product packaging container, and also several others

Minimum température d’opération 950.
Hauteur( mm) 800. Opération. Incinerator little to instrument waste dispossal for about 150-200 metropolitan waste from mall, office in addition to domestic.

The waste most contain vary materials plastics, rubber, paper, turf, leaves, woods, fruits, packaging carton, and also plenty of others

Posted on by

Heater capability of destruction of 350 kg/hour

common daily massacre involves 120 pigs. The Condemned item as well as also byproducts from the abattoir for disposal is around 1000 kgs.daily
one line incinerator for the destruction of harmful clinical waste.

– – – – Heater ability of damage of 350 kg/hour, calorific well worth of waste will definitely be 13-25 MJ/kg

[3,500 kcal/kg] and also ideal cozy ability 1,225,000 kcal/hr.

– – – – Burner damages ability will definitely be 8.4 tons/day and additionally procedure time will definitely be 24 human resources./ day.

– – – – Waste will be with automatic feeding system right into the burner.

-The temperature degree will definitely regulated in varying flow and also portion in oxygen, burning gas is re-burned

in the re-combustion [additional] chamber at a temperature level of minimum 1,100 C throughout 2 secs.

– – – – Control board will certainly be fitted with an useful synoptic sight revealing the operating circumstance of the whole

heater and also handled by DCS/PLC system.

– – – – Gas therapy system will absolutely appreciate the EE standard [Directive 2000/76/EC -4/ 12/2000.

– – – – TOC of slag as well as bottom ashes will certainly be much less 3% of the dry weight.

– – – – Arrangement will certainly be completely free from visible smoke.

– – – – Heater will certainly be created as a Packaged system, having electric link pre-wired and last pipelines

in position.

– – – – Incinerator will have automated de-ashing system with upward direction.

– – – – Burner will certainly have flue gas therapy system comprehensive [emergency situation by-pass pile, gas cooling system,

two activators as well as also particulates filtering system] as well as assurance of discharges out of burner.

– – – – Training of AKU workers at website.

– – – – Web site could be reviewed as well as likewise take a look at existing ATI manufacturer, capability 150 kg/hr. in 1 day treatment.

– – – – Existing facilities space is conveniently available in basement, 100′ ′ Size x 30 ′ large x 20 ′ Altitude for 2nd Incinerator.

– – – – Existing smokeshaft size is 12 meter, and also size is 24″ ″ dia.

Posted on by

déchets médicaux

———————————–

  • À défaut d’établir l’authenticité du certificat, le soumissionnaire est susceptible de rendre l’offre non recevable et

soumissionnaire ouvert à une action conforme à la réglementation applicable et à agir.

  • Le catalogue original doit être soumis
  • La feuille de données originale doit être soumise

Lot-B

  1. Solidifiant (produit d’élimination des déchets liquides)

Solidifiant des déchets liquides à base d’eau.

Caractéristiques spéciales de Solidifier

Bouteille 21b

  • Solidifie efficacement et rapidement les déchets infectieux potentiellement graves
  • Pénètre rapidement pour solidifier le sang et les fluides corporels pour convertir les gels en quelques secondes
  • Aucune secousse requise
  • Conserve la solidité pour éviter les déversements et les fuites pour un ensachage sûr et facile et un transport facile vers l’élimination
  • Formule concentrée: une once solidifie 1000 cc de liquide
  • Sachets solubles gel 500 cc et 1000 cc, éliminant les déchets de bouteilles en plastique Sans chlore pour une incinération non toxique

Caractéristiques physiques / chimiques:

Point d’ébullition (F): N / A Apparence et odeur: Blanc cassé,

inodore

Pression de vapeur (mm Hg): N / A Volatils (‘% en poids):

N / A

Densité de vapeur (Air = 1): N / A Taux d’évaporation (n-

butylacétate = 1): N / A

Classification HMIS:

Santé: 1: Inflammabilité: 1

Données de réactivité:

Stabilité: stable

Conditions à éviter: aucune connue

Incompatibilité (matières à éviter): Oxydants forts

Décomposition dangereuse: Décomposition thermique: hydrocarbures CO, Co2 et NOx

Polymérisation dangereuse: ne se produira pas

Précautions de manipulation et de stockage:

Conservez dans un endroit frais et sec. Évitez de respirer la poudre. Évitez le contact avec les yeux et la peau. Conserver dans un contenant hermétiquement fermé. 80% des

la durée de conservation doit être présente au moment de la fourniture.

Posted on by

南京伊希歐風淋室專業廠家簡要介紹

2019年05月22日 行業動態 442 views

最專業的南京風淋室供應商-伊希歐是凈化設備製造業的領先企業。多年的發展磨練，積累了豐富的行業經驗和技術，也培養了一批具有專業服務意識的凈化行業工作人員。通過多年的口碑積累，Ecolead的風淋室、潔凈棚、捲簾過濾器、空氣過濾器相關產品得到廣大客戶的信任和喜愛。

選購風淋室產品是一件比較嚴肅和專業的工作，售前我們會提供專業的購前指導意見和選型建議。針對一些潔凈室改造項目，我們會有專門技術人員上門測量繪圖，根據圖紙制定方案和報價。會提供現場安裝（指導）、調試、培訓等服務，提供風淋室設備保養及規範操作培訓。售後我們會有專員定期回訪客戶，一年質保期內非人員損壞免費維修，質保期過後提供優惠配件，終身提供技術指導和諮詢。

南京伊伊希歐就是以始終保持盡善盡美的售前售後服務與產品質量來開拓市場的。您的一次性消費，獲得的是長期的服務與技術支持。

下面簡單介紹下風淋室的構造

1，風淋室的箱體材質採用的是優質冷軋鋼板烤漆處理和不鏽鋼底板。

2，配備大風量雙速高壓風機。

3，採用優質無隔板高效過濾器，過濾效果高達99.99%@0.3um。

4，不鏽鋼噴嘴，出風口的風速>22/s，噴嘴方向可以360度任意調節。

5，配備了紅外線感應器多組，程序預設防逃功能，配合客戶規範風淋室的使用，達到最大化凈化效果

6，不鏽鋼單開門，德國品牌閉門器，可承受長時間高頻率使用。

7，PLC控制系統，進口電器元件，感應自動吹淋，LED顯示吹淋時間(0~99s可調)。

更多內容 網址: www.ecolead.cn 電話: 025-57138032

Posted on by

Medical Incinerator Yd-50

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Medical incinerators instalation in trinidad, medical incinerators manufacturers, medical incinerators small, medical incinerators supplier, medical incinerators suppliers, Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below: 

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant. 

Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 

Incinerator fuel: Gas incinerator, oil incinerator 

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 

Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer. 

Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

Items/Model YD-30 YD-50 YD-100 YD-150
Burning Rate (kgs/Hour) 30 kgs/Hr. 50 kgs/Hr. 100 kgs/Hr. 150 kgs/Hr.
Feed Capacity (kgs) 60 kgs 150 kgs 200 kgs 300 kgs
Equipment Weight 2300 kgs 4000 kgs 4300 kgs 7000 kgs
Primary Chamber (Liters) 360 900 1200 1500
Secondary Chamber (Liters) 200 200 500 500
External Dimensions (cm) 145x90x175 200x160x230 220x180x360 240x170x380
Internal Dimensions (cm) 100x60x60 120x90x85 130x100x90 150x100x96
Oil Tank(Liters) 200 300 300 500
Door Opening (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Chimney (M) 5 5 10 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
Posted on by

little array incinerator of shedding capacity

Chicken Burner – – – – 400 kgs feed per day.a tiny scale incinerator of shedding capability 30kg/hr= 1No. Note that it needs to be mobile as this is meant for oil areas service tented camps. It has to be diesel operated as our location is remote. 150! kg per human resources LPG electric burner to be utilized at the international airport. This is a requirement bu the biography safety and security and also security that all global flights need all rubbish sweltered within a recognized time.Required lots ability is 150Kg
Chamber – – – – Primar 900 liters Additional: 300Litres
Smokeshaft 8M
Burning Cost: 50kgs/hr Yes.
Feed Capability: 150kgs Yes.
Key Burning Chamber: 900 litres Yes.
Second Combustion Chamber: 300 litres Yes.
Mix Combustion Chamber: Yes Yes.
Smoke Filter Chamber: Yes Yes.
Feed Setting: Manual Yes.
Power: 0.7 Kw Yes.
Gas Kind: Diesel Oil/ Natural Gas/LPG Yes. Various Price if oil or gas fuel.
Internal Dimensions: 120 x 90 x 85cm (trick chamber) Yes.
Outdoors Dimensions: 200 x 160 x 310cm (without smokeshaft) Yes.
Burning Performance: >> 98% Yes