Category: incinerators

In a simple design with a metal steel drum electric. including:
A cage for receipt of biomedical waste;
A combustion chamber with fireplace with a filter to retain ashes;
A cover;
An air supply;
A turbine  allowing the supply of the air.
Combustion temperature: 1800 ° C. Compliance with European standards.
Comes with all necessary accessories
Supply of incinerator model PDR-18 with:

·        Capacity 100 kg/hr of waste containing up to 85% moisture

?      Two combustion chambers

·        Two fully automatic, oil fired, pressure jet burners

·        Panel board

·         Diesel tank of capacity 250 It. with 2 diesel pipelines, filter and valve.
Type: for animals waste
Capacity: 30 kg per hours for a maximum load of 120 kg.
GLP Gas
Voltage: 110V-120V
Semiautomatic control board
Stainless steel chimney, 3.5 meters above the incinerator.
High temperature painting for all the incinerator.
Front door for loading and unloading.
Fuel    Diesel Oil 8/ kerosene
Capacity (m3)    0.57
Ave Capacity    50 kg per hour
Ave time for Burnout     5 hrs
External Dimensions
Length    2000mm
Width    1100mm
Height including flue    3500mm
Door opening
Internal Dimensions
(primary chamber)
Length    1200mm
Width    620mm
Height     660mm
Operation
Min. operating temperature    9500C
Max. operating temperature    13200C
Residency time in second chamber    2.0 seconds
Weight    1850kgs
Ancillaries
Operating and maintenance manuals
Recommended Spare list
300 liter fuel tank
Plant burning rate – 100kg/hr

Fuel – Diesel oil   – 35 sec Redwood

Overall dimensions are as follows:

Width    2261mm

Length  3264mm

Chimney Diameter  –  390mm

Chimney Height      –  8000mm
chinese incinerator manufacturers, We process 8-10 ton waste of sheep carcass and its byproduct per day. We are looking for the equipment: combustion burners(combined fuel supply:natural gas and diesel),control panel and filter system. The diameter of the incinerator is 20 cm. Lower calorific power of the waste is 4KW/KG. Heating power 4000KW

Doors

The doors shall be hinged on the right hand side and can be easily opened and closed. All doors shall be manually

operated. Incinerator shall NOT incorporate automatic doors. All doors should be internally lined with pre-determined

thickness insulation and refractory cement.

Stack

The stack shall be fabricated from pre-determined thickness stainless steel plate suitably flanged for connection.

Combustion Air Blower

A combustion air blower shall be of steel construction type with built-in air damper regulation shall be provided. The

impeller shall be of the radial blade design and all rotating elements shall be dynamically balanced.

Burners

Burners fitted shall be of packaged fuel oil fired types. Primary chamber shall be fitted with an on/off type burner

while the secondary chamber shall be fitted with a high/low type burner. The burners shall each have a maximum rating

of300,000 kJ/hr.

Controls

A control system shall be provided to control all functions of the primary and secondary chambers including combustion

air distribution and burner control. It shall comprise of PLC, temperature controllers, timers, relays and switches to

provide automatic operation of the entire system. All switches and controls shall be mounted in an IP 55 rated control

panel.

Power Supply

The incinerators shall have a power supply of 240/415 volts, 50 Hz AC. All electrical works shall conform to SAA Wiring

Rules SA 3000 and be subject to PNG Power regulations.