Posted on

Incinérateurs de déchets puissants

Le professionnel fournira un ensemble de système de crémation pour 2 (02) crémateurs ainsi qu’un système autorisé par l’autorité associée, qui doivent s’adapter à la zone allouée comme indiqué sur les dessins de stratégie.

En raison de la situation monétaire actuelle en Bulgarie, nos recherches prévoient qu’un système de 100 kg / heure peut répondre aux exigences établies dans la tâche.

S’il vous plaît, offrez-nous un système d’incinérateur qui peut correspondre aux critères spécifiés ci-dessus.
Notre société pense que notre technologie créera certainement une exigence importante pour ce type d’incinérateur et constituerait certainement une excellente opportunité pour une entreprise, telle que Clover, qui est capable et désireuse de les fabriquer et de les offrir en plus.

2. Tous les travaux d’architecture, de construction et d’architecture qui comprennent, mais sans s’y limiter, la construction ainsi que la construction de tous les travaux de béton améliorés, de puits de fumée, de travaux de charpente en acier ainsi que de tous les travaux de structure pour tous les besoins nécessaires, système de contrôle et de panneaux fonctionnels pour verdict approprié ainsi que le traitement réussi du système.
Le radiateur doit fonctionner fréquemment 24 heures sur 24, 7 jours sur 7, il doit donc pouvoir être nettoyé tout en continuant à fonctionner. Les déchets perdus contiendront des produits non combustibles et ceux-ci devront certainement être nettoyés de l’appareil de chauffage. Nous aimerions vraiment que ce nettoyage soit aussi basique que viable. Il en va de même pour le chargement des déchets directement dans le radiateur, ce que nous aimerions pouvoir faire instantanément lorsque cela est possible.

3. Tous les travaux mécaniques et électriques qui comprennent encore une quantité limitée à la fourniture, fournissent en plus de la configuration de tous les arrêts, conduite forcée, écrans, pompes, interrupteurs à flotteur, adaptateur polyvalent, caractéristiques du tuyau d’anxiété, ventilateur, bossoirs de levage galvanisés à chaud, diffuseurs d’air, mains courantes galvanisées à chaud, grilles galvanisées douillettes, tableaux de distribution, câblage ainsi que câblages électriques supplémentaires, éclairage, mise à la terre, comptage, protection contre l’éclairage, dimension de débit en plus des enregistreurs de débit, blindage & & & & mise en service et tout le nécessaire pour une réflexion finale correcte et un fonctionnement efficace du système

GLOBALEMENT OBTENU À LA COLLECTION

Mise en page et développement d’un système de crémation au gaz approuvé.
(Cont serait absolument)

4. La Société fournira et respectera entièrement tous les besoins de l’autorité liée tout au long de la phase de style, de l’autorisation de conception, de l’évaluation en plus de l’analyse après analyse, en retournant le plan du système, qu’il soit clairement révélé ou autrement pris en compte comme requis pour une conclusion fiable avec satisfaction à l’autorité. Le prestataire de services doit avouer son prix de soumission tous les prix indirects ainsi que les prix directs sans prix supplémentaire pour le client pour toutes ces conformités. Sorte de déchets: Biomédicaux / Dommages / Zone / Poubelle = TOUS et Mixtes
8. Tout autre: caoutchouc, pneus en caoutchouc, batteries, déchets verts, papier ainsi que carton
9. Quantité de déchets produits chaque jour en kg: 3 à 5 tonnes par jour
Avez-vous besoin d’un système de chargement automatisé? Avez-vous besoin d’un système d’épuration des gaz? Avec quelle rapidité appelez-vous pour que le système soit fourni?
20. Ville en plus du pays d’utilisation: Australie.
Les déchets solides ainsi que les déchets inflammables doivent pouvoir être récupérés rapidement de l’incinérateur en utilisant un traitement automatique. En effet, l’incinérateur sera certainement appelé à fonctionner 24h / 24 et 7j / 7. Un brûleur initial est nécessaire pour une preuve de la tâche de suggestion ainsi que les futures commandes pour le fournisseur fiable, après la mise en œuvre efficace de ce projet, sont susceptibles d’être considérables.

5.

6. Pour la maintenance ainsi que les remèdes pendant la période d’obligation de dérangement, la durée de réaction à tout type de plainte pour laquelle le fournisseur de services doit intervenir doit être dans les 24 heures.

8.

Le spécialiste fournira un ensemble de système de crémation pour DEUX (02) crémateurs et également un système autorisé par l’autorité associée, qui doit convenir à l’emplacement attribué comme indiqué sur les illustrations d’approche.

Les déchets générés toutes les heures ont à voir avec 100 kg par heure, mais avec une quantité quotidienne de 1000 kg.

En raison de la situation financière actuelle de la Bulgarie, nos recherches sur les programmes selon lesquels un système de 100 kg / heure peut répondre aux exigences établies dans le poste.

Veuillez nous fournir un système de brûleur pouvant correspondre aux critères spécifiés ci-dessus. Tous les travaux également électriques et mécaniques, qui incluent encore la fourniture, la fourniture et l’installation de toutes les vannes, conduite forcée, écrans, pompes, interrupteurs à flotteur, adaptateur adaptable, caractéristiques du tuyau d’anxiété, ventilateur, bossoirs de levage galvanisés à chaud, diffuseurs d’air , mains courantes galvanisées à chaud, grilles galvanisées douillettes, tableaux de distribution, câblage et circuits similaires, éclairage, mise à la terre, comptage, protection contre l’éclairage, mesure du débit ainsi que des enregistreurs de circulation sanguine, tests et mise en service et tout le nécessaire pour une conclusion correcte et un fonctionnement efficace du système

GLOBALEMENT OBTENU À LA COLLECTION

Concevoir et établir un système de crémation au gaz accepté.

– – Cheminée réfractaire solitaire pour 2 crémateurs

– – Plateforme de dégustation de gaz de combustion

– – Circuit électrique conforme aux besoins du système

– – Outils de ratissage

– – Cendrier

– – Autorisation du DOE / Autorité régionale

– – Toute autre portée / travaux requis pour les systèmes

Posted on

簽訂常州QF環保公司自動捲簾式空氣過濾箱合同

2019年05月18日 公司新聞 240 views

現如今國內污染日益嚴重,而處理污染也成了頭等大事。人生活離不開空氣和水因為“霧霾”的嚴重威脅導致我們已經失去新鮮的空氣,所以不能讓我們賴以生存的水也被污染。

因此對石油化工廠、火電焦化廠、垃圾焚燒、鋼鐵冶金、噴塗車間等行業廢氣污水排放要求日趨嚴格,2017年是新一輪治理工作的開端,我公司與江浙滬一帶的環保工程公司的合作更加頻繁。

而常州QF環保公司就是與我們公司合作的一員,該公司位於常州科教城內,是蘇南地區知名的廢氣污水治理、達標排放的環保工程公司,已成功在上海股交中心掛牌上市。

我公司的自動捲簾式過濾器具備優良的性能以濾料可自動更換,尺寸可任意選定,可以長期使用,操作便捷的四大優點吸引的他們與我公司簽約。金山銀山,不如綠水千山,南京伊希歐自動捲簾過濾器為我們的生產生活環境保駕護航。

更多內容 網址: www.ecolead.cn 電話: 025-57138032

Posted on

china medical waste incinerator

Incinerate: medical waste and general waste

Capacity to burn waste: 400 — 500 kg/hr

Fuel: Diesel

Fuel Consumption: 10 litres/hr maximum

Incineration temperature: 950 – 1300 °c

Casing: thick (min 5 mm) Stainless steel casing and completely

insulated to withstand sea humidity

Voltage: 220/240 V or 380/415V

Frequency: 50 Hz

Feeding: automatic

Ash 1 leftovers removal: Automatic

Fuel gas filtration system: Yes

Warranty: 12 months

Staff training: Operator & Maintenance staff

Operation and service manuals: 3 sets every

 

  • With Chassis to be Mounted in truck/lorry

 

  • May have a primary and secondary combustion chamber

 

  • Must have a dilution chamber

 

  • Capacity: 100 Kgs per hour

 

  • Power Source: Diesel or Natural Gas or Liquified Natural Gas

 

  • General wastes produced on a daily basis include paper, plastic, organic materials, boxes, plastic

containers, leaves, etc;

1. The double chamber incinerator shall preferably be designed. Air distribution in the primary and secondary chamber shall be

regulated between 30%-80% and 170%-120% of stoichiometric amount respectively. The combustion air shall be provided through a

separate forced draft fan accounting for the air provided through burners. Provision shall be made in the primary

chamber to gauge the water column pressure.

chamber and 1200 dc in the secondary chamber. The refractory& insulation bricks shall have minimum 115mm thickness every

  1. Capacity : up to 4000kg burn not less than 500 kg /hr
  2. The refractory lining of the chamber shall be strong enough to sustain minimum temperature of 1000dc in the primary

& conform to IS:8-1983 & IS:2042-1972 respectively.

heat resistant aluminium paint suitable to withstand temp.of 250 dc with appropriate surface preparation. Refractory lining

  1. The incinerator shell shall be made of SS/MS plate of adequate thickness (minimum 5mm) and painted externally with

of the hot duct shall be done with refractory castable (minimum 45mm thick)& insulation castable(minimum 80mm thick).

Ceramic wool shall be used at sexy duct flanges & expansion joints.

5. There shall be a separate burner each for the primary & secondary chamber. The heat input capacity of each burner

shall be sufficient to increase the temp.in the primary & secondary chambers as 800+/- 50dc and 1050+/-50dc respectively

within maximum of 60 minutes before waste charging. The burners shall have automatic switching off/on control to

avoid the changes of temperatures beyond the essential temp.range.

6. Incinerator shall have computer or graphic recording device that will automatically and continuously monitor and

record dates, time of day, batch sequential number,Co,Co2,O2 in gaseous emission shall also be  measured daily.

6mm plate steel sheel structure

11cm 1400 o C Refractory L iner

Temperature controlled Burners

Secondary combustion Burners

Interlock Switch on Load Doors

Independent Ash Door

One Second secondary Residence @ 1000 o C

400 ° C Silicone Based Paint Finish.

Alloy Temperature Sensor

Factory wired and tested

Capacity-20 kg / hr

Main Chamber-1607 L

Hearth Area-1:36 sq. m

Secondary Chamber-694 L

Primary Burner (petroleum )-420,000 btu

Secondary Burner (petroleum )-900,000 btu

secondary Combustion-1/6 hp

Exhaust Stack-46cm x 6m

Electrical Service-220/50

Weight System-5.700 kg

Dimension “D”-152cm

Load Port Height- 60x 60 cm

Ash Port Height -36 x 36 cm

with minimum of 3mm thick natural tough rubber Appropriate for the duty conditions and shall also conform to IS:4682 part

  1. Structural design of the chimney/stack shall be as per IS:6533-1989.The chimney/stack shall be lined from inside

I-1968 to avoid corrosion to oxygen and acids in the flue gas.

INCINERATEUR DE DECHETS HOSPITALIER

INCINERATEUR DE DECHETS HOSPITALIER

Posted on

small medical waste incinerator

i- burners:

use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used

for protection.

2- materials:

-the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate insulation 11cm

thickness with the ability to change this layer .

– All surfaces made of carbon steel should be surface treated and covered with primary layer. That holds the working

condition and easy to clean it is recommended that materials are chosen according to standard codes.

Chimney exhaust gas filtration:

To meet the European standard 2000/76/EC

Chimney height should not be less than 12 meter and radius 8 cm.

 

– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is

to;

– A secondary air injection is expected and provides perfect oxygen content;

– The burner ensures a minimum temperature of 1100 ° C continuous;

– The design of this burner is similar to combustion burners;

– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;

– The afterburner is lined with high thermal insulation with a thickness of 150 mm

 

  1. Cabinet, control and regulation:

– The entire installation will conform to European standards (EU)

– The electrical power is 220V 50Hz single phase.

– Regulators of temperature with digital display:

? 1 to regulate the temperature of the combustion chamber

? 1 for controlling the temperature of the afterburner

? The manual controls are provided on each item.

  1. Should have preparation, Incineration, Scrubber steps to burn waste completely and waste gas should be non-

polluted

 

  1. Heavy duty steel, heat resistant coating, stainless steel lid, painted tubular steel frame, 2-blowers, axial

vane, suitable drum (S/S, thick) for the incinerator must be provided.

 

  1. Approx. 20 to 25 Kg per batch and the time required for 1 batch not more than 1 hour on average.
Posted on

Подписан контракт на строительство воздушной душевой для Nanjing SPEC Biochemical Industrial Company.

18 мая 2019 г. Новости компании192 просмотра

Компания является профессиональным научно-исследовательским и производственным предприятием в области биоинженерии. Существует множество промышленных баз, которые делятся на базу пептидного синтеза, базу синтеза химического сырья, базу сырья для экстракции растений и базу сырья для ферментации. Некоторые из функциональных научно-исследовательских центров и научно-исследовательских центров клинического применения обычно должны быть оснащены оборудованием для очистки чистых помещений, таким как шкафы биологической безопасности, воздушные души и передаточные окна. Подписанный на этот раз контракт является проектом реконструкции, и стандартная холодильная плита нашей компании Выбирается краска для запекания Тип воздушного душа. Nanjing SPEC Biochemical Industry Co., Ltd. была основана в 1995 году и расположена в новом районе Цзянбэй, Нанкин. Это высокотехнологичная группа профессиональной косметики и сырья для личной гигиены, объединяющая научные исследования, производство и продажи. Опираясь на ключевые университеты, компания занимается исследованиями, разработками и производством биоинженерии, косметических пептидов, натуральных продуктов и химического синтеза.

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032

Posted on

Установка для сжигания медицинских отходов

Базовая информация.

Номер модели: установка для сжигания медицинских отходов
Экспортные рынки: глобальный

описание продукта

Nanjing Clover Medical Technology Co., Ltd. – ведущий производитель мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Мусоросжигательные заводы малой мощности, малые инсинераторы, инсинераторы syc-100, мусоросжигатели w2e, мусоросжигатели – Китай, производители мусоросжигательных заводов Китай, www. Китай-мусоросжигательный завод. Чистое, пиролитическое оборудование для сжигания отходов является основным оборудованием для обработки отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время мы поставляем различные серии в соответствии с требованиями местных клиентов и проектируем обновленную мусоросжигательную печь с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.

Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Область применения:
1. Больница и клиника: медицинские отходы, инфекционные отходы, перевязочные материалы, биологические отходы, медицина.
2. Бойня, больница для домашних животных и ферма: трупы животных, биоотходы.
3. Сообщество, морской порт и вокзал: твердые бытовые отходы и т. Д.
4. Лаборатории, удаленные районы, операции по оказанию помощи при стихийных бедствиях, кремация животных

Предметы / Модель TS10 (ПЛК) TS20 (ПЛК) TS30 (ПЛК) TS50 (ПЛК) TS100 (ПЛК)
Скорость сжигания 10 кг / час 20 кг / час 30 кг / час 50 кг / час 100 кг / час
Емкость подачи 20кг 40кг 60кг 100кг 200 кг
Режим управления ПЛК ПЛК ПЛК ПЛК ПЛК
Камера сгорания 100л 210л 330 л 560 л 1200L
Внутренние размеры 50x50x40 см 65x65x50 см 75x75x60 см 100x80x70 см 120x100x100 см
Вторичная камера 50 л 110л 180л 280L 600 л
Камера дымового фильтра да да да да да
Режим подачи Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации Руководство по эксплуатации
Напряжение 220В 220В 220В 220В 220В
Мощность 0,5 кВт 0,5 кВт 0,5 кВт 0,7 кВт 0,7 кВт
Расход масла (кг / час) 5,4–12,6 7,8–16,3 10,2–20 12.1–24 14–28
Расход газа (м3 / час) 6,2–11,4 8–15,7 9,8–20 9,9–26,1 10–32,2
Монитор температуры да да да да да
Температурная защита да да да да да
Масляный бак 100л 100л 100л 100л 200л
Дверца подачи 30×30 см 45×40см 55×50см 70×55см 80×60 см
Камин 3 метра 3 метра 5 метров 5 метров 10 метров
Тип дымохода Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь
Время проживания 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек.
Вес брутто 1500 кг 2200кг 3000кг 4500кг 6000кг
Внешние размеры 140x90x120 см 160x110x130 см 175x120x140 см 230x130x155 см 260x150x180 см
Posted on

การปรับปรุงหน่วยเครื่องปรับอากาศ SKC Jiangsu

2019-05-20 ผลลัพธ์และ คดี207 ครั้ง

ชื่อโครงการ: SKC ตัวกรองชัตเตอร์ลูกกลิ้งอัตโนมัติแบบพลาสติกที่ทันสมัย

แนะนำโครงการ: ใหม่หน่วยกรองหลักกรองม้วนกรอง

ระยะเวลาดำเนินการ: 2016.3




SKC ก่อตั้งขึ้นในปี 1976 เป็นบริษัทผู้ผลิตวัสดุระดับไฮเอนด์ภายใต้กลุ่ม SK เป็นผู้นำด้านการพัฒนาอุตสาหกรรมฟิล์มและเคมีของเกาหลีมากว่า 40 ปี เริ่มจากการพัฒนาฟิล์มโพลีเอสเตอร์ที่เก่าแก่ที่สุดในเกาหลี SKC ได้สร้างชีวิตที่มีสุขภาพดีและชีวิตมนุษย์เพื่อโลกที่ดีขึ้นในอนาคตเราจะดำเนินการสร้างสรรค์นวัตกรรมทางเทคโนโลยีสำหรับวิสัยทัศน์โดยมุ่งเน้นที่การเติบโตของสาขาวิชาเคมีที่จำเป็นสำหรับการพัฒนาอุตสาหกรรมแห่งชาติ

ในฐานะบริษัทชั้นนำอย่างแท้จริงในอุตสาหกรรมภาพยนตร์และวัสดุเคมี SKC ใช้เทคโนโลยีชั้นนำและประสบการณ์อันยาวนานเพื่อเข้าสู่ธุรกิจใหม่ที่มีมูลค่าเพิ่มสูงและขยายขอบเขตของตลาดต่างประเทศเพื่อให้มั่นใจถึงโมเมนตัมการพัฒนาที่ยั่งยืนในอนาคต และมุ่งมั่นที่จะผลิตที่เกิดขึ้นใหม่ ผลิตภัณฑ์เฉพาะทางที่มีประสิทธิภาพสูงในสายธุรกิจได้กลายเป็นบริษัทผู้ผลิตวัสดุที่ทันสมัยที่สุดในโลก

ในเวลาเดียวกัน เพื่อให้เกิดการพัฒนาร่วมกันและยั่งยืนในวันพรุ่งนี้ SKC จะมีบทบาทอย่างมีประสิทธิภาพในการจัดการสิ่งแวดล้อม การจัดการอย่างมีจริยธรรม และด้านสังคมและสิ่งแวดล้อมอื่นๆ ผ่านการแนะนำและฝึกฝนผู้มีความสามารถหลักระดับโลก และการปรับปรุงขั้นสูง ของโครงสร้างพื้นฐานด้านการจัดการ , เสริมสร้างความสามารถในการแข่งขันในตลาดต่างประเทศ ด้วยความกระตือรือร้นอย่างเต็มที่สำหรับลูกค้าและจิตวิญญาณแห่งความท้าทายสู่อนาคต สมาชิกทุกคนจะทำงานร่วมกันและก้าวหน้าอย่างกล้าหาญไปสู่เป้าหมายของ “Global Specialty Material Company”

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

Posted on

Oil Incinerator

Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below: 

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant. 
Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 
Incinerator fuel: Gas incinerator, oil incinerator 
Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 
Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer. 
Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 
Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour 

Clover supply medical waste incinerators, pet and animal cremators, other solid waste incinerators to over 30 countries. We have re-designed the incinerators lining configuration. We have also designed and installed our very own PLC computer system into incinerator operation system. Clover know it is 
Incinerator research, incinerator sampah, incinerator small, incinerator small scale waste oil, incinerator small size 100 kg, incinerator smart ash review, important that build them better, keep it simple and offer a great service. We make quality products that give excellent payback on investment, our incinerators are the most robust and thermally efficient in the industry.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 degree 800–1000 degree 800–1000 degree 800–1000 degree 800–1000 degree
2nd. Chamber Temperature 1000-1200 degree 1000-1200 degree 1000-1200 degree 1000-1200 degree 1000-1200 degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Posted on

Système de traitement des déchets médicaux

Système de traitement des déchets médicaux

Le système de traitement des déchets médicaux sera certainement respectueux de l’environnement et aura une capacité de
relatif à 200-300kg par kit, pour permettre la thérapie des déchets médicaux développés dans un lit de 160
centre médical
Si l’équipement doit être auto-générateur de vapeur
la vapeur est nécessaire pour le traitement sanitaire.
– Des choses en acier. – Déchets pathologiques.
– Compacter les déchets pour réduire leur quantité
Le déchargement des déchets séchés sera certainement automatique, avec encore plus de centre de broyage
Tous les attributs en cours d’exécution seront certainement automatisés et sans risque
1. L’ensemble du cycle sera certainement informatisé avec toutes les exigences d’exploitation importantes sécurisées ainsi que
protégé par mot de passe.
2. Il y aura un dossier caractéristique du cycle de traitement,
Le dispositif doit avoir un mode de fonctionnement pratique en cas d’arrêt du fonctionnement des attributs automatiques
Le respect des critères sera certainement présenté:
1. Allumez
2. voyant d’indication de stérilisation
3. commutateur automatique / manuel
4. voyant d’avertissement de porte ouverte
5. pression de vapeur
6. enregistreur de diagramme cyclique

Posted on

Required Specifications for Mobile Incinerator

Operational Capabilities

  • PROCESS MINIMUM 1 TON PER DAY
  • OPERATED WITH LIMITED TRAINING
  • REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING
  • COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS
  • ABILITY TO BURN WASTE LUBRICANTS (POL)
  • HANDLE ORGANIC SOLIDS (TO INCLUDE RMW)
  • DEPLOYABLE
  • MOBILE
  • 24 HRS OF CONTINUOUS USE
  • AUTOMATIC LOADING SYSTEM
  • AUTOMATED ASH REMOVAL SYSTEM
  • GAS SCRUBBING SYSTEM
  • 95% REDUCTION OF SOLID WASTE
  • OPERATE OFF DIESEL OR FUEL OIL
  • CAPABLE OF BURNING 4 UNITS OF WASTE PER UNIT OF FUEL
  • ABLE TO TAKE ALL COMBUSTIBLE WASTE TO INCLUDE: PAPER, PLASTIC, CARDBOARD, FOOD, USED OILS, SLUDGE, OILY RAGS, WOOD
  • NO PRE-TREATMENT OF WASTE REQUIRED
  • FIVE (5) YEAR COMPONENT WARRANTY

 

 

 

Technical Specifications

  • OPERATION MANUAL AND TRAINING MANUAL FOR EACH INCINERATOR
  • SET UP AND INSTALLATION INSTRUCTION MANUALS
  • BLUE PRINT/ SCHEMATIC PROVIDED THAT OUTLINES THE PHYSICAL DIMENSIONS OF THE 20’ INCINERATORS
  • INCINERATORS COMPOSED WITH HEAVY DUTY WELDED CONSTRUCTION
  • OPERATED AND TRANSPORTED IN 20’ INCINERATORS (CONTAINERS)
  • FULL FRONT AND OPTIONAL REAR ACCESS
  • PRIMARY / SECONDARY TEMPERATURE CONTROLS