Tag: wasteincinerators

common daily massacre involves 120 pigs. The Condemned item as well as also byproducts from the abattoir for disposal is around 1000 kgs.daily
one line incinerator for the destruction of harmful clinical waste.

– – – – Heater ability of damage of 350 kg/hour, calorific well worth of waste will definitely be 13-25 MJ/kg

[3,500 kcal/kg] and also ideal cozy ability 1,225,000 kcal/hr.

– – – – Burner damages ability will definitely be 8.4 tons/day and additionally procedure time will definitely be 24 human resources./ day.

– – – – Waste will be with automatic feeding system right into the burner.

-The temperature degree will definitely regulated in varying flow and also portion in oxygen, burning gas is re-burned

in the re-combustion [additional] chamber at a temperature level of minimum 1,100 C throughout 2 secs.

– – – – Control board will certainly be fitted with an useful synoptic sight revealing the operating circumstance of the whole

heater and also handled by DCS/PLC system.

– – – – Gas therapy system will absolutely appreciate the EE standard [Directive 2000/76/EC -4/ 12/2000.

– – – – TOC of slag as well as bottom ashes will certainly be much less 3% of the dry weight.

– – – – Arrangement will certainly be completely free from visible smoke.

– – – – Heater will certainly be created as a Packaged system, having electric link pre-wired and last pipelines

in position.

– – – – Incinerator will have automated de-ashing system with upward direction.

– – – – Burner will certainly have flue gas therapy system comprehensive [emergency situation by-pass pile, gas cooling system,

two activators as well as also particulates filtering system] as well as assurance of discharges out of burner.

– – – – Training of AKU workers at website.

– – – – Web site could be reviewed as well as likewise take a look at existing ATI manufacturer, capability 150 kg/hr. in 1 day treatment.

– – – – Existing facilities space is conveniently available in basement, 100′ ′ Size x 30 ′ large x 20 ′ Altitude for 2nd Incinerator.

– – – – Existing smokeshaft size is 12 meter, and also size is 24″ ″ dia.

Chicken Burner – – – – 400 kgs feed per day.a tiny scale incinerator of shedding capability 30kg/hr= 1No. Note that it needs to be mobile as this is meant for oil areas service tented camps. It has to be diesel operated as our location is remote. 150! kg per human resources LPG electric burner to be utilized at the international airport. This is a requirement bu the biography safety and security and also security that all global flights need all rubbish sweltered within a recognized time.Required lots ability is 150Kg
Chamber – – – – Primar 900 liters Additional: 300Litres
Smokeshaft 8M
Burning Cost: 50kgs/hr Yes.
Feed Capability: 150kgs Yes.
Key Burning Chamber: 900 litres Yes.
Second Combustion Chamber: 300 litres Yes.
Mix Combustion Chamber: Yes Yes.
Smoke Filter Chamber: Yes Yes.
Feed Setting: Manual Yes.
Power: 0.7 Kw Yes.
Gas Kind: Diesel Oil/ Natural Gas/LPG Yes. Various Price if oil or gas fuel.
Internal Dimensions: 120 x 90 x 85cm (trick chamber) Yes.
Outdoors Dimensions: 200 x 160 x 310cm (without smokeshaft) Yes.
Burning Performance: >> 98% Yes

50 bed medical care center as well as additionally would enjoy to have your recommendation for burner that can effectively handle the tons of 50 bed hospital.Incinerator for burnable garbage (paper & & & & natural) device ability (100/150 lts). Bio Medical Waste Incinerators,

Ability: 50kgs per hr Medical Waste Burner Design TS50 (PLC) with both choice on Fuel (Gas as well as additionally/ or Diesel2 Burners
2 Temperature degree Thermocouple
5 meters for thermal gasket
1 heater control instance
1 Blower ecologically friendly incinerator for shedding polyproplylene bags we have 10 lots weekly

in acinerator with 300 kg/ hr by twin filter wet as well as dry.Pet Cadaver Incinerator upto 80 kg, gas operated is liked. pet waste heater with ability pertaining to 40Kgs. We will use this item to melt the animal remains in common technique (not ill aninal). Can you please ahead me quote for heater that appropriates for service Community with a people of 200,000 individuals including other basic neighborhood waste to lose. Technical demands info sheet
List and likewise amounts of consumables called for monthly
Listing as well as also expense of all the spares called for each year
Checklist along with costs of all the spares required in 5 years
List as well as also costs of all the spares called for in one decade

2 burners one with 500kg/day shed capacity another one with 1000kg/day thaw capacity

1 x Electrode

1 x Gas Filter

1 x Photocell

1 x Versatile pipe

1 x Nozzle

1 x Control Box

heaters that can handle Bio-Medical waste (red bag) from lab with level 2 in addition to 3, pet research study, and health centers. There are additionally a percentage of Pharmaceutical waste to be damaged. I would definitely like your referrals on what heaters would certainly handle the these demand based upon the sticking to regular monthly kgs of material.

Site 1– – 4,650 Kgs regular monthly (I have suggest that I set up 2 burners at this location given that it is a medical research center in addition to the use is very high)

Web Site 2– – 1000Kgs each month (this center deals extra with animal research study nonetheless also has red bag waste from their research study side, they currently have a massive animal carouse heater)

Website 3– – 1000Kgs each month (this facility is an area medical care facility with bio-waste from dealing with people)

The first is a small
20kg/per hr incinerator for a small-medium sized hospital, and the
second is a 500kg per/hr incinerator for a company planning to start a
incineration service in Lahore.Burn Rate : >200 kg per hour
Average fuel consumption : ~29 kg per hour ( Or lesser)
Gas Retention in Secondary Chamber : 2 secs
Temperature Monitoring : Yes
Average Ash Residue : 3%Medical waste management practises here are sub-standard. I have come across your small scale medical waste management units.Biomedical Waste Incinerator, 10-15 kg
Manufacturer:
Brand:
Type / Model:
Country of Origin:
Description of Function
The Biomedical Waste Incinerator is used for Incineration of each type of Biomedical Waste.
The Disposal of such Biomedical waste is a very important as it is a dangerous wastes for
human life, and It is only possible with a perfect incinerator.
Operational Requirements
It shall be operated by manual and automated mode.
The combustion efficiency (CE) shall be at least 99.00%.
The combustion efficiency is computed as follows:
C.E.= __%CO2______ x 100
%CO2 + %CO
Emission Standards: Lower emission rates are preferred.
Parameters                   Concentration in mg/Nm3 (12% CO2 correction
Max total dust              30mg/m3
Max Sulphur Dioxide      200mg/m3
Max Nitrogen dioxide    400mg/m3
Max Carbon                     100mg/m3
Monoxide
Minimum stack height shall be 30 metres above ground.
Volatile organic compounds in ash shall not be more than 0.01%.
System Configuration
Biomedical Waste Incinerator, complete unit.
Technical Specifications
Incinerator:
It shall be Electrical or Diesel Fired Incinerator or Controlled Air & pyrolytic.
Type of Waste: Biomedical Waste
It shall have burning capacity 10-15 kg/hr.
Fuel: Diesel
Burner: Monoblock fully automatic burners.
Temperature: Primary Chamber 800 ± 50 oC, Secondary Chamber 1050 ± 50 oC.
Type of Waste: Biomedical waste with moisture content up to 85%.
Destruction Efficiency: 99%.
It shall have separate digital display of temperature for both chambers.
It shall have provision for measuring primary & secondary chamber temperatures using external
thermo coupler.
Secondary chamber gas residence time shall be minimum 1 second at 1050 oC.
Primary Chamber:
Type: Static Solid Hearth
Material of Construction: Mild Steel, 5mm thick
Refractory thickness: approx.115mm thick
Material: Refractory bricks confirming to international standard.
Temperature resistance: 1400 oC
Insulation thickness: approx.115mm thick
Material: Insulation bricks confirming to international standard.
Waste Charging: Manual & Automatic waste charging.
Ash Removal: Manual/automatic
Secondary Chamber:
Type : Static Solid Hearth
Material of Construction: Mild Steel, 5mm thick
Refractory thickness: approx.115mm thick
Material: Refractory bricks confirming to international standard.
Temperature resistance: 1400 oC.
Insulation thickness: approx.115mm
Material: Insulation bricks confirming to international standard.
Waste Charging: Manual & Automatic waste charging.
Emergency Stack:
Type: cylindrical, top mounted on venturi ejector.
Material of Construction: Mild Steel, 3mm thick.
Refractory: 75mm thick castable.
Insulation: 25mm thick castable.
Quencher:
Material of construction of outer body: Mild Steel refractory lined from inside.
Shall have water circulation system with centrifugal pump.
It shall have to reduce flue gas temperature before venturi scrubber.
Shall provide pump motor of suitable capacity.
Air Pollution Control Device – Venturi Scrubber
Type: High pressure jet type.
MOC: Stainless steel – 316L.
Temperature at the outlet: 78-80 oC
Scrubbing Media: Water with 5% caustic
Re- Circulation Pump for Venturi Scrubber
Type: Centrifugal
Application: PP/SS
Piping : PPR
Droplet Separator & Re-Circulation Tank (Integral)
Type: Cyclonic
Application: To separate water droplets from flue gases
Material of Construction: Mild Steel Rubber lined 3mm thick
I.D. Fan:
Type: High pressure centrifugal
Material of Construction: Stainless steel 304, impeller and mild steel rubber lined casting
Drive: Bel
Combustion Fan:
Type: Centrifugal
Modulation: Manual damper control
Material of Construction: Mild Steel
Drive: Direct drive
Burners:
No. of burners: 2 Nos. (1 No. in Primary Chamber and 1No. in Secondary Chamber)
Type: Monoblock fully automatic
Fuel: Diesel
Fuel Oil Storage Tank:
Shall provide suitable capacity of oil storage tank.
Material of Construction: Mild steel.
Facility for visual checking of fuel shall be there.
It shall have diesel consumption monitoring system.
It shall come with diesel oil level indicator, piping with valves & N.R. valve.
Control Panel:
Type: Manual & Automated PLC based control panel with printer & recording device.
Material of Construction: CRCA sheet
It shall have digital temperature controller.
Epoxy powder coated washable paint finish.
It shall have audio-visual alarm system.
Chimney of 30 meters Height:
Material of Construction: Mild Steel
It shall be self-supporting type.
Height shall be 30 meters from ground level.
Paint The chimney is painted externally with two coats of heat resistant aluminum paint
Shall provide ladder till the top.
It shall have 3mm thick rubber lining from inside for protection.
It shall come with aviation lamp, lightening arrestor, stack, drain, inspection platform, sampling
port.
Consumption certificate:
The bidder must submit diesel consumption for a daily operation of 6 hours.
Turnkey:
Prices offered shall be inclusive of all civil works, electrical requirements including cabling and
switches required for installation & commissioning of the equipment.
Bidder shall submit detail drawings, design, and layout plan of civil works.
The bidder shall submit the details of BOQ of civil and electrical works.
Accessories, spares and consumables
All standard accessories, consumables and parts required to operate the equipment, including
all standard tools and cleaning and lubrication materials, to be included in the offer. Bidders
must specify the quantity of every item included in their offer (including items not specified
above).
Operating Environment
The system offered shall be designed to store and to operate normally under the conditions of
the purchaser’s country. The conditions include Power Supply, Climate, Temperature,
Humidity, etc.
Power supply: 220-240 VAC, 50Hz single phase/400 – 420 VAC, 50Hz three phase as
appropriate fitted with appropriate plug. The power cable must be at least 3 meter in length.
Standards and Safety Requirements
It shall have approval of “Pollution Control Board” of purchaser’s country.
All mandatory approvals required for the installation and operation of incinerator shall be done
by the bidder.
Must submit ISO 9001 AND
CE or USFDA approved product certificate.
User Training
Must provide user training (including how to use and maintain the equipment).
Warranty
Comprehensive warranty for 2 years after acceptance.
Maintenance Service during Warranty Period
During the warranty period supplier must ensure preventive maintenance along with
corrective/breakdown maintenance whenever required.
Installation and Commissioning
The bidder must arrange for the equipment to be installed and commissioned by certified or
qualified personnel; any prerequisites for installation to be communicated to the purchaser in
advance, in detail.
Documentation
User (Operating) manual in English.
Service (Technical / Maintenance) manual in English
List of important spare parts and accessories with their part number and costing.
Certificate of calibration and inspection from factory.